INTERTECHNICK BAR CORE INDUCTORS

Specifications:
Conductor: 99.99% Oxygen-free Copper. Round enamelled wire.
Insulation: Type V Enamel.
Bobbin material: Polyamid
Dimensional stability: 85°C.
Inductance values tested at 1KHz / 25°C
Inductance tolerance: +/- 5%.
Connecting leads: 50mm; last 20mm left uninsulated.
Core type: Bar-core made from grain-oriented silicon iron laminations.
Applications: High power systems such as in-car hi-fi or PA systems.
These high-power-handling inductors offer extremely low distortion, well below 0.1% at their rated power, typically 0.01% – 0.05% (100 Hz – 5KHz)